Recently, I attended the National Business Aircraft Association convention in Las Vegas.  We were having a Board meeting of the Lindberg Foundation and I got the opportunity to visit with new and old friends and get a chance to check out the latest business jets and products.  I had supported the NBAA cause in the past by donating a tour of Fantasy of Flight and flight in a cool airplane for one of their charity auctions.

While there, we presented Jeppesen CEO Mark Van Tine an award for his company joining the Lindbergh Foundation Aviation Green Alliance, which supports and honors the Aviation Industry for promoting environmental challenges within their field.  True to my typical form, no one told me I was supposed to wear a suit and tie!

Presentation to Jeppesen

After checking out the goodies at the Las Vegas Convention Center, I got out to Henderson Airfield to check out the latest hardware.  While there, I couldn’t help but check out my Dream Jet – the Embraer Phenom 300!

My Dream Jet!

Now how cool is that!  One day I hope to be able to justify one, as it’s an aspect of my flying career I would love to experience.

Dreaming of my own personal transportation!

Hey, Kermit, maybe you should work on getting your Instrument Rating first!

Kermit

Most everyone is aware of the two beautiful P-51 Mustangs we have on display at Fantasy of Flight: P-51C, Ina the Macon Belle, and P-51D, Cripes A’Mighty. But did you know that I’ve also had a North American P-51A in storage for many years?  I purchased it in the early 1980’s but, because I had first the “D”, and then the “C” to fly, I never really pursued getting the “A” flyable and focused on other projects.

The project is in great shape and years ago I sent the it out to Art Teeters’ Cal Pacific Airmotive in California to slowly begin working on.  I was in no hurry and the project has been on and off the “burner” for several decades.  Art and his son Dave did the restorations on both the “C” and the “D”, which both won Grand Champion Warbird at the Sun ‘n Fun as well as the Oshkosh Fly-In’s.  It seemed only natural to let them do the “A.”

New Stainless Steel Parts

Recently, I told Art to get back on the project again.  They had just completed the metalwork on another P-51A project and the shop was now up to speed on its slightly different construction.  It seemed only natural to take advantage of their current knowledge.

There came a great opportunity to visit the shop again when I was invited out to Dave Teeters recent wedding!  I had not been out to the shop in years.  One wing is basically done and the other is in assembly.  Currently they are focusing on finishing up the wings before diving in to the fuselage.

Right Aileron in Jig

As we began to think of how we were going to paint the airplane, I decided to do something different.  It seems everyone wants their airplane to stand out from the crowd, whether its the paint job or some special thing about it that no one else has.  Well, I guess I’m no different!

Early in the War, the factory made some of the P-51A’s with cannons instead of guns.  They were built mostly for the British but in researching into it, I discovered there were a few Americans that flew them as well.

Second Wing Half in Jig

Left Wing in Jig

Eventually, we discovered a likely candidate flown in the Mediterranean Theater by a 1st Lt. Dean R. Gilmore in a 111th Photo Recon paint scheme.  It was an airplane called Snoopers with some great artwork on the nose depicting its photo mission status as well as the number of missions it had flown.  Dean was awarded the DFC for one of his Recon missions over Monte Cassino, Italy and went on to fly 91 missions between August, 1943 and May, 1944.  By the time he returned home, he had accumulated a total of 194 combat flying hours and had flown more missions than anyone else in his squadron.

As a side twist to all this, Racing Legend Jack Roush at one point wanted to buy my P-51C but I told him it was not for sale.  He did the next best thing and acquired a data plate and paperwork for an early Mustang and had it basically built up from scratch by Cal Pacific Airmotive.  He originally intended to paint it in Dean’s colors but eventually decided on a paint scheme for another P-51B.

Lt. Gilmore and Snoopers

But this is where the story gets interesting.  After serving overseas, Dean returned to the States to train other pilots in Central Florida, flying out of the Bartow Airbase.  Unfortunately, he was killed on a training mission in a P-51B over Lake Louisa, near Clermont, FL just north of Fantasy of Flight.

Through an amazing twist of synchronicity, I had been asked years ago to do a fly-over for a memorial service in Cripes A’Mighty while family and friends watched from the shoreline.  I had no idea at the time that IT WAS OVER LAKE LOUISA AND WAS FOR LT. GILMORE!

The event was to commemorate a memorial for Dean’s contributions and sacrifices, which now stands at the south shore of Lake Louisa.  To add another bizarre twist to the story , the wreck Jack Roush got his data plate from WAS FROM THE RECOVERED WRECK OF LAKE LOUISA!

Lt. Gilmore's Noseart!

Needless to say, his family is very excited about the project and have offered to help in any way with information and photos.  In the words of famous radio personality Paul Harvey . . . “So now you know . . . the rest of the story!”

If you want to learn more about Lt. Gilmore and his exploits, check out http://www.swissmustangs.ch/72468.html.

Kermit

Last year I was honored by being inducted into the World Acrobatics Society Hall of Fame in Extreme Sports for my accomplishments in airplane aerobatics.  This was also partly due to  my beginning background in Gymnastics, where I competed on my High School’s first year Gymnastic Team and later went on to compete at the college level.  While I never got to the level of my flying, it was certainly an influence in my early pursuit of competition aerobatics.

One of the cool things after being inducted  was that I was now able to nominate others.  I was not aware of this until asked to do so for my category of Extreme Sports.  There was no question who that would be: my good friend Sean Tucker!  I had know Sean over the years from the flying circuit and we were Heli-ski partners for ten years.  He is, without a doubt, the most prolific solo airshow performer in the world and has dazzled millions of spectators over the years as well as given back to the aviation community by inspiring speeches as well as running a flight school to teach aerobatics, flight safety, and unusual attitudes to many pilots.

Two Extreme Sports Awardees's!

This September I was honored to return to Las Vegas to present Sean with his Award.  Go Sean!

Kermit

While on a recent California business trip this September, I got the chance to check up on a couple of airplane projects as well as acquire another great addition to the collection.

Over the years, I’ve had several projects worked on by Carl Scholl and Tony Ritzman’s Aero Trader facility at the Chino Airport.  They were responsible building up my North American B-25, the Apache Princess, which received Grand Champion Warbird at the Sun ‘n Fun Fly-In and Reserve Grand Champion Warbird at the EAA Oshkosh Fly-In.  After Hurricane Andrew devastated the Weeks Air Museum in Miami in 1992, I sent my Douglas A-26C attack bomber out to them to rebuild.

A-26 under restoration

When I purchased the airplane back in the mid-1980’s, it was very original and probably the most authentic A-26 in the world.  While flying it back from California, I happened to stop at an airshow in Texas and while showing someone the airplane, flipped on a couple of switches in the back and found that the rear gunner turrets still operated!  I was impressed.

Rear gunner position for the upper and lower remote turrets

My airplane had the distinction of having flown in both WWII as well as Korea and sported the colors of Whistler’s Mother for many years.  Other A-26’s went on to be used during the Vietnam war, giving them the distinction of being the only American combat airplane to have participated in three wars.  Seeing the opportunity to take what was already the most original A-26 in the world to an even higher level of detail, I told them to disassemble and go through the entire airplane.

Bomb Bay detail

While the airplane appears to have been originally built with the glass bomber nose, which the “C” model designation signifies, it also came with four gun packs under the wings, housing a total of eight .50 caliber machine guns.  I’m not sure whether or not it was originally built this way in WWII or modified for Korea but we intend to continue researching this as well as its original colors.  Combined with the four .50 guns in the upper and lower turrets, it was not an airplane to mess with.

Three of the four guns mounted per side that are housed in streamlined pods

Three of the four guns mounted under one wing, which are contained in streamlined pods

I also got a chance to check up on a project we’re about to start on for a Rosie the Riveter display we’ve been designing for Fantasy of Flight.  It’s one of the new attraction elements were striving to create that immerse people in history around a theme common to the human experience and in a way they self-discover something about themselves for themselves.  It will involve a factory assembly line for B-29’s and that’s were Aero Trader comes in.

B-29 nose for a new Rosie the Riveter Display!

I purchased a B-29 nose years ago and we intend to clean it up, as if it was being built on an assembly line.  I don’t want to give away too many details of our plans but keep an eye on our progress!

I also had the chance to check out a rather historic helicopter: a Sikorsky S-55, which had flown with the world’s first Helicopter Airline out of New York City to La Guardia Airport and other local destinations.  The owner and I had talked over the years and he recently called to tell me he decided to sell it.

With my new (well, OK, old) Sikorsky S-55!

Having decided to include early helicopters in the collection, I couldn’t resist checking it out.  It had flown as recently as the late nineties but had a light blade strike, which will require going through everything to be safe.  While it will be a long-term project, I couldn’t resist acquiring this great piece of history!

Due to space considerations, I will leave it in California until we get our new storage facility completed.  Look for it to arrive at Fantasy of Flight sometime in the early Spring of 2012!

Kermit

Progress continues to be made on the Benoist airplane we are building at Fantasy of Flight for the 100th Anniversary of the first scheduled commercial airplane flight on 1/1/2014.

Restoration specialist, Ken Kellett, is heading up the construction of the airframe and has begun making jigs for the fuselage sides, ribs, and a mock-up of the center-section to get an idea of where everything will go.

Most people that reproduce old airplanes only go half the distance to do it right and end up installing a modern engine and don’t get near the same performace as the original.  This is because of the rpm the engine delivers it’s horsepower and turns the propellor.  Most modern engines turn at a higher rpm for use with smaller propellors at higher speeds.  At the speed realm of the older airplanes, modern engines cannot create the thrust needed like a slow moving large diameter propellor.

That’s not the way we like to do things.  However, there was a problem . . . we couldn’t find an engine to purchase ANYWHERE!

There’s a Crankshaft in there somewhere!

I hired Steve Littin of Vintage Auto and Rebuilds in Ohio to scratch build the six-cylinder Roberts engine that we’ll need for the project.

An original cylinder and a mold plug

His company currently builds Rolls Royce Silver Ghost car engines from scratch of the same period and is well-qualified to do the job.  I was able to purchase two four-cylinder Roberts engines but only know of about six original engines that were in museums and unavailable for purchase.

Cylinder Molds

We were able to borrow a six-cylinder Roberts that had been in a crash from Old Rhinebeck Aerodrome to reverse-engineer.  The four-cylinder engines that I have put out 50 hp.  The Benoist uses a six-cylinder Roberts that is basically a stretched four-cylinder to produce 75 hp.  The cylinders and carburetors are identical and the plan is to build the case molds for both the four and six-cylinder engines.

Roughed in Connecting Rods!

It’s an exciting project for everyone.  We’re living our product by pushing our boundaries. It will be great to see how all this unfolds!

Kermit

1 8 9 10 11 12 30